Our Services

Pipe Repair and Replacement in Abilene, TX

From a single pipe repair to a complete repipe, we restore your plumbing system with quality materials and expert craftsmanship.

What You Need to Know

The pipes running through your home are the backbone of your entire plumbing system. They carry fresh water to every fixture and remove wastewater safely to the sewer or septic system. When pipes deteriorate, corrode, crack, or burst, the consequences can range from minor leaks to catastrophic flooding. Total Quality Plumbing provides complete pipe repair and replacement services for homes and businesses throughout Abilene, TX and the Big Country.

Many homes in the Abilene area, particularly those built before the 1980s, still have galvanized steel pipes that are prone to internal corrosion, restricted water flow, and eventual failure. Even newer homes can experience pipe problems from shifting soil, tree root intrusion, freeze damage during cold Big Country winters, or defective materials.

We repair and replace all types of plumbing pipe including copper, PEX, CPVC, galvanized steel, cast iron, and PVC drain lines. Whether you need a spot repair for a single leaking pipe or a full house repipe to replace aging galvanized lines, our licensed team delivers quality work with minimal disruption to your home.

Signs You Need This Service

  • Discolored or rusty water from your taps, especially hot water
  • Low water pressure throughout the house or at specific fixtures
  • Visible corrosion or green staining on exposed copper pipes
  • Frequent leaks in different areas of the home
  • Water stains on walls or ceilings indicating hidden pipe leaks
  • Banging or rattling pipes (water hammer) when fixtures are turned on or off
  • Wet spots in the yard that could indicate an underground pipe break
  • Home has original galvanized steel pipes from the 1960s, 70s, or 80s

Risks of Delaying Repair

  • Pipe burst causing sudden flooding and extensive water damage to floors, walls, ceilings, and personal property
  • Contaminated water from corroded galvanized pipes that can contain rust, sediment, and potentially lead from old solder joints
  • Sewer line collapse from deteriorated cast iron or clay pipes, resulting in raw sewage backup into your home
  • Foundation damage from underground pipe leaks that saturate Abilene's clay soil and cause shifting
  • Mold growth inside walls and ceilings from slow, hidden pipe leaks
  • Dramatically reduced water pressure that makes showers, appliances, and irrigation systems perform poorly
  • Insurance claim denial if damage results from known deferred maintenance on deteriorated pipes

Our Process

1

Assessment

We evaluate the condition of your pipes, identify the material, age, and extent of the problem, and determine whether a spot repair or more extensive replacement is needed.

2

Recommendation

We present your options with upfront pricing — whether that is a targeted repair, a partial repipe, or a full house repipe.

3

Pipe Work

We remove the damaged or deteriorated pipe and install new pipe with proper fittings, supports, and connections.

4

Testing

We pressure test the new pipe to verify leak-free performance before closing up any walls or ceilings.

5

Restoration

We patch access points as needed and leave the work area clean.

Frequently Asked Questions

How much does repiping a house cost in Abilene, TX?
Whole-house repiping costs depend on the size of the home, number of fixtures, accessibility of existing pipes, and the material chosen for the new pipes. Total Quality Plumbing provides detailed, upfront estimates. Call (325) 266-4887 to schedule an assessment.
Should I repipe my house if it has galvanized pipes?
If your Abilene home has original galvanized steel pipes and you are experiencing rusty water, low pressure, or frequent leaks, repiping is strongly recommended. Galvanized pipes corrode from the inside out and the problem only gets worse over time.
What type of pipe is best for repiping?
PEX (cross-linked polyethylene) is the most commonly used material for residential repiping today. It is flexible, resistant to corrosion and freezing, and typically less expensive to install than copper. We can discuss the pros and cons of each option for your specific situation.
How long does a whole house repipe take?
A full house repipe typically takes 2 to 5 days depending on the size of the home and accessibility of the existing pipes. We work efficiently to minimize disruption and restore your water service as quickly as possible.
Can pipes freeze and burst in Abilene?
Yes. While Abilene has generally mild winters, temperatures can drop below freezing during cold fronts and ice storms. Pipes in uninsulated areas like attics, crawl spaces, and exterior walls are at risk. If a pipe freezes and bursts, call Total Quality Plumbing immediately.

Pipe Repair and Replacement Across the Big Country

Total Quality Plumbing provides pipe repair and replacement services throughout Abilene, Clyde, Merkel, Tuscola, Potosi, Tye, Buffalo Gap, Lawn, Hawley, Anson, Winters, Sweetwater, Baird, and all surrounding Big Country communities in Texas. Travel is charged at $0.07 per mile.

Abilene, TXClyde, TXMerkel, TXTuscola, TXPotosi, TXTye, TXBuffalo Gap, TXLawn, TXHawley, TXAnson, TXWinters, TXSweetwater, TXBaird, TX
View Full Service Area

Ready to Schedule Pipe Repair and Replacement?

Have a plumbing project or emergency? Fill out the form below and Jacob will get back to you personally with expert advice and a fair estimate.

Call Directly

(325) 266-4887

Availability

Monday through Friday, 8:00 AM to 5:00 PM