Our Services

Backflow Testing and Repair in Abilene, TX

Certified backflow testing and repair to keep your drinking water safe and your property compliant with TCEQ regulations.

Call (325) 266-4887Request a Quote

What You Need to Know

Backflow is the unwanted reverse flow of water in a plumbing system. When backflow occurs, contaminated water from irrigation systems, boilers, fire suppression systems, or other non-potable sources can flow backward into your clean drinking water supply. This is a serious public health risk. Total Quality Plumbing provides certified backflow prevention assembly testing and repair throughout Abilene, TX and the Big Country.

The Texas Commission on Environmental Quality (TCEQ) requires backflow prevention assemblies at cross-connections where potable water systems connect to potential sources of contamination. These assemblies must be tested annually by a licensed tester to verify they are functioning correctly. Failure to comply can result in fines and disconnection of water service.

Jacob Gonzalez holds TCEQ Backflow Prevention Assembly Tester License #BP0020975, making Total Quality Plumbing fully certified to test, repair, and replace all types of backflow prevention assemblies. We serve residential properties, commercial buildings, and irrigation systems throughout the Big Country.

Signs You Need This Service

  • Your water utility has notified you that backflow testing is due
  • You received a compliance notice from your water provider or TCEQ
  • You have an irrigation system connected to your potable water supply
  • Your property has a fire suppression or sprinkler system
  • You notice discolored, foul-tasting, or foul-smelling water at your taps
  • Your backflow preventer is leaking, dripping, or making unusual noises
  • You are installing a new irrigation system or commercial plumbing system
  • It has been more than 12 months since your last backflow test

Risks of Delaying Repair

  • Contamination of your drinking water with pesticides, fertilizers, bacteria, or chemicals from irrigation or industrial systems
  • Serious illness from consuming water contaminated by backflow, including gastrointestinal disease and chemical exposure
  • TCEQ fines and enforcement actions for failure to maintain and test backflow prevention assemblies
  • Disconnection of water service by your water utility for non-compliance with backflow testing requirements
  • Liability if contaminated water from your property enters the public water system and affects other users
  • Failed property inspection or permit denial due to missing or non-compliant backflow prevention

Our Process

1

Scheduling

We coordinate testing at a time convenient for you and ensure we have all required equipment and documentation.

2

Testing

We test the backflow prevention assembly using calibrated test equipment per TCEQ procedures, checking the check valves, relief valve, and air gap as applicable to the assembly type.

3

Reporting

We complete the required TCEQ test report and submit it to your water utility on your behalf.

4

Repair If Needed

If the assembly fails testing, we diagnose the issue and make repairs on the spot in most cases, then retest to verify compliance.

5

Certification

You receive a copy of the passing test report for your records and compliance documentation.

Frequently Asked Questions

What is backflow and why is it dangerous?▾
Backflow occurs when water flows backward through your plumbing system, potentially pulling contaminants from irrigation systems, boilers, or other non-potable sources into your clean drinking water. This can introduce pesticides, fertilizers, bacteria, and chemicals into your water supply, posing serious health risks.
How often does a backflow preventer need to be tested in Texas?▾
TCEQ requires backflow prevention assemblies to be tested annually by a licensed tester. Your local water utility may also have specific testing requirements and deadlines. Failure to test can result in fines or disconnection of water service.
Is Total Quality Plumbing certified for backflow testing?▾
Yes. Jacob Gonzalez holds TCEQ Backflow Prevention Assembly Tester License #BP0020975. We are fully certified to test, repair, and replace all types of backflow prevention assemblies in compliance with TCEQ regulations.
Do I need a backflow preventer for my irrigation system?▾
Yes. In Texas, any connection between a potable water system and an irrigation system requires a backflow prevention assembly. This is required by TCEQ to prevent pesticides, fertilizers, and bacteria in your irrigation system from contaminating your drinking water.
What happens if my backflow preventer fails the test?▾
If your backflow assembly fails testing, it must be repaired and retested. Total Quality Plumbing can typically diagnose and repair the issue on the same visit, retest the assembly, and submit the passing report to your water utility.

Backflow Testing and Repair Across the Big Country

Total Quality Plumbing provides backflow testing and repair services throughout Abilene, Clyde, Merkel, Tuscola, Potosi, Tye, Buffalo Gap, Lawn, Hawley, Anson, Winters, Sweetwater, Baird, and all surrounding Big Country communities in Texas. Travel is charged at $0.07 per mile.

Abilene, TXClyde, TXMerkel, TXTuscola, TXPotosi, TXTye, TXBuffalo Gap, TXLawn, TXHawley, TXAnson, TXWinters, TXSweetwater, TXBaird, TX
View Full Service Area

Other Services We Offer

Drain Stoppages and Cleaning

Fast clearing of clogged drains in kitchens, bathrooms, and main sewer lines.

Water Heater Installation and Repair

Expert installation, repair, and maintenance with free estimates.

Gas Line Detection and Repair

Safe and precise gas leak detection and repair to keep your property secure.

Leak Detection and Repair

Advanced detection and fast repair of water leaks before they cause major damage.

Fixture Installation and Repair

Faucets, sinks, toilets, and bathtubs installed and repaired to last.

P-Trap Repair and Replacement

Eliminate odors and stop sewer gas from entering your home.

View All Services

Ready to Schedule Backflow Testing and Repair?

Have a plumbing project or emergency? Fill out the form below and Jacob will get back to you personally with expert advice and a fair estimate.

Call Directly

(325) 266-4887

Availability

Monday through Friday, 8:00 AM to 5:00 PM